Hot CISCO Labs

Download Tools Used In This Post:

VTGO-PC-Lite-2.10.1.200 
  
Note:This Feature will work only with this VTGO version.I tested this using newer versions and it did NOT work.

Run multiple IPBlue Softphones:

1. Create a new IP Blue shortcut with the  ‘/d’ option following the softphone executable.
2. Open the IP Blue Softphone
3. Change the phone options
   • Set the TFTP Server to the ip address of your CUCM server
   • Set the MAC Address with the Network interface option
   • Set the Primary Call Manager
   • Select an IP Phone model to emulate
4. Open the Windows registry editor (Click Start > Run  and type regedit)
5. Export the Phone settings
   • Navigate to the HKEY_LOCAL_USER\Software\IPBlue branch
   • Right-Click on the IPBlue folder and select ‘Export’
   • Give the registry file a descriptive name and click ‘Save’
6. Repeat Steps 3-5 for each virtual phone you would like to use.
7. Double-Click one of the .reg file for one of the softphones saved in steps above.
8. Open the IP Blue Softphone.
9. Double-Click another .reg file for one of the softphones saved in steps above.
10. Open the IP Blue softphone again. (The IPBlue software references the settings in the system registry during startup)
     

We all knowe how to use CIPC to register with CME using SCCP , but now i'm going to show you how to configure SIP on CME and register with X-Lite softphone , the configuration in GNS3 is a C2691 router connected on F0/0 to my VMware VMnet 1 host only virtual adapter , now let's do it! 

Download Tools Used In This Post:

C2691 IOS Image
X-Lite 
 
Router Interface Configuration:

HOT.CISCO.LAB#conf t
HOT.CISCO.LAB(config-if)#ip address 192.168.100.1 255.255.255.0
HOT.CISCO.LAB(config-if)#no shut
HOT.CISCO.LAB(config)#do ping 192.168.100.10

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.100.10, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/20/68 ms

Global Voice Service Configuration Commands:

HOT.CISCO.LAB(config)#voice service voip
HOT.CISCO.LAB(conf-voi-serv)# allow-connections sip to sip
HOT.CISCO.LAB(conf-voi-serv)# sip
HOT.CISCO.LAB(conf-serv-sip)#  registrar server
HOT.CISCO.LAB(conf-serv-sip)#bind all source-interface f0/0

SIP Core Configuration Commands:

HOT.CISCO.LAB(config)#voice register global
HOT.CISCO.LAB(config-register-global)# mode cme
HOT.CISCO.LAB(config-register-global)# source-address 192.168.100.1 port 5060
HOT.CISCO.LAB(config-register-global)# max-dn 10
HOT.CISCO.LAB(config-register-global)# max-pool 5

Configuring The DN:

HOT.CISCO.LAB(config)#voice register dn  1
HOT.CISCO.LAB(config-register-dn)# number 1001

Configuring The IP Phone:

HOT.CISCO.LAB(config)#voice register pool  1
HOT.CISCO.LAB(config-register-pool)# id mac 0050.56C0.0001
HOT.CISCO.LAB(config-register-pool)# number 1 dn 1
HOT.CISCO.LAB(config-register-pool)# username 1001 password mahamouda
Note:The username must be the same as the DN number and will be used in X-Lite as your User ID.



Using Some Show Commands:

HOT.CISCO.LAB#sh voice register pool 1
Pool Tag 1
Config:
  Mac address is 0050.56C0.0001
  Number list 1 : DN 1
  Proxy Ip address is 0.0.0.0
  DTMF Relay is disabled
  Call Waiting is enabled
  DnD is disabled
  keep-conference is enabled
  username 1001 password mahamouda
  service-control mechanism is not supported
  registration Call ID is ZTgwNzU1YTkxNDAzZWUyMmM2OTAwZTFiZDVhZjVmZTA
  active primary line is: 1001

  contact IP address: 192.168.100.10 port 44340


Dialpeers created:

dial-peer voice 40001 voip
 destination-pattern 1001
 session target ipv4:192.168.100.10:44340
 session protocol sipv2
  after-hours-exempt   FALSE

Statistics:
  Active registrations  : 1

  Total Registration Statistics
    Registration requests  : 1
    Registration success   : 1
    Registration failed    : 0
    unRegister requests    : 0
    unRegister success     : 0
    unRegister failed      : 0

Note:Make sure that there is NO CODEC mismatch and at least one common CODEC is configured on your ephone and the CODEC's on your soft phone.